Cleveland’s dolos breakwater marks 10 years of Lake Erie resilience
- Category
- Military affairs
- Source
- U.S. Army Corps of Engineers, Buffalo District
At a glance
- What
- Military Affairs
- Who
- U.S. Army Corps of Engineers, Buffalo District
- When
- Nov 19, 2026 at 4:18 PM UTC
Statement from U.S. Army Corps of Engineers, Buffalo District, November 19. Story by Maj. Avery Schneider.
Along Cleveland’s lakefront, opposite the city’s 55th Street Marina, more than 16,000 massive concrete shapes line a section of the East Breakwater, forming an unusual but essential defense against Lake Erie’s powerful waves.
The structures are called dolosse: 6.5-ton, anchor-like concrete units that interlock like oversized jacks. Rather than creating a solid wall that reflects wave energy, the porous arrangement disrupts and dissipates waves as they reach the breakwater.
Ten years after the U.S. Army Corps of Engineers Buffalo District completed their installation, the dolosse remain a visible example of how engineering, local manufacturing and precise construction can strengthen Great Lakes navigation infrastructure for decades.
The Lake Erie shoreline may look calm on a clear day, but Cleveland Harbor’s East Breakwater is built to withstand far more than routine weather. The East Breakwater, built in 1915, has endured generations of waves, ice and storms while helping protect one of the Great Lakes’ busiest commercial harbors.
In 2012, Superstorm Sandy brought unusually powerful waves to Lake Erie.
While Sandy is often remembered for its East Coast effects, the storm also produced extreme conditions across the Great Lakes. In Cleveland, northeast-driven waves struck portions of the harbor infrastructure designed to defend against waves more commonly rising from the west and northwest.
The storm damaged existing breakwater sections, including smaller concrete dolosse installed during a previous experimental repair in the late 1970s. Those earlier units weighed about two tons each and, ultimately, were not heavy or durable enough to withstand the wave conditions the East Breakwater would face.
Congress provided funding after Superstorm Sandy, allowing the Buffalo District to evaluate the damage, model wave conditions and design a long-term repair. The work was completed in November 2016 after 17 months of construction at a cost of $19.7 million.
An engineered answer to Lake Erie waves
The 2016 project repaired 4,275 linear feet of the East Breakwater. Crews installed 16,743 dolosse along the breakwater’s easternmost section, supported by more than 61,000 combined tons of bedding and underlayer stone.
The stone layers form a stable foundation beneath the concrete units and help prevent finer material from washing out through the structure. The dolosse then create a rough, interlocking surface that absorbs wave energy and helps keep the armor system in place.
“Think of a smooth sand beach where a wave can kind of run up and continue moving, or a big rocky beach where the wave kind of tumbles and then just fades,” said Weston Cross, a Buffalo District coastal engineering subject matter expert. “It dissipates.”
The dolos shape allows engineers to use a smaller concrete unit than an equivalent piece of armor stone would require in a similar wave environment. The units gain strength from their interlocking arrangement, making placement density essential to the repair’s long-term performance.
Dolosse were first developed in South Africa in 1963 and initially deployed the following year on the breakwater at East London, a South African port city. Their distinctive form has since been used in coastal projects around the world to help manage wave energy.
For Cleveland Harbor, the Buffalo District worked with the U.S. Army Engineer Research and Development Center to develop a numerical wave model, helping engineers determine the appropriate size and arrangement of the units.
Built in Ohio, placed with precision
The Cleveland repair also supported Ohio manufacturers.
Lindsay Concrete Products Co. of Canal Fulton, Ohio, fabricated custom steel forms to help ensure each unit met the required dimensions. Anthony Allega Inc. of Valley View, Ohio, cast the 6.5-ton dolosse at a production rate of more than 300 per week.
After being transported to Cleveland, the dolosse were moved by barge and placed using modified excavators equipped with GPS-guided positioning software. Construction crews attached recoverable tracking devices to individual units, allowing operators to verify each dolos’ underwater position and orientation as it was placed.
That level of precision helped crews establish the dense interlocking matrix needed for the structure to perform as designed.
“It’s not just a matter of taking the dolosse out there and plopping them on the structure,” Cross said. “The critical parameter during construction is the density of the placement, measured in number of units per 1,000 square feet.”
A decade of performance
Buffalo District personnel recently examined the dolos field as part of the district’s annual Operational Condition Assessment process. Teams inspect navigation structures across the Great Lakes by land and boat, documenting visible conditions such as material deterioration, slope stability and crest alignment.
Cross participated in the field inspection and said the team observed no noticeable movement or signs of structural distress in the 2016 repair. “We’re 10 years on, and this thing is performing exactly as we designed and intended,” Cross said.
The completed dolos repair has a design life of at least 50 years. Routine inspections will continue to help the Buffalo District monitor conditions and plan maintenance for structures that protect navigation channels, shoreline infrastructure and public access along the Great Lakes.
Protecting a harbor and the economy it supports
Cleveland Harbor is a vital connection in the Great Lakes Navigation System. The harbor handles about 13.8 million tons of cargo annually, supporting $646.1 million in business revenue, 2,329 jobs and $142.6 million in labor income.
Iron ore, limestone and salt are among the primary commodities moving through the harbor. Those shipments support steelmaking, manufacturing, construction, winter road treatment, water treatment and other regional needs.
Breakwaters, piers and jetties help vessels enter and leave the harbor safely. They also provide a protected refuge for boaters when Lake Erie conditions change quickly and help limit wave impacts to nearby shorelines and infrastructure.
Over the past decade, the Buffalo District has invested nearly $48.8 million in design and repair efforts for Cleveland Harbor navigation infrastructure, including its West Pier and multiple breakwaters.
The successful 2016 dolos repair is separate from planned work on five other reaches of the five-mile-long East Breakwater. Built in 1915 and repaired periodically since, other portions of the structure have deteriorated over time.
A September 2025 survey identified five reaches with reduced crest elevation, shifted or tipped armor stone, lost core stone, localized settlement and steepened side slopes. Those areas were not included in the post-Superstorm Sandy repairs and have experienced a longer period of deterioration than other sections of the breakwater.
The Buffalo District has designed essential repairs for the five reaches using a rubble-mound approach. The design will tailor repair dimensions to each location, restoring the structure’s ability to serve its intended navigation and shoreline-protection functions while minimizing stone use. The work does not include additions or changes to the breakwater’s original purpose.
An environmental assessment and public-review opportunity are planned for summer 2027. The design effort is expected to conclude in fall 2027, and the Buffalo District’s in-house repair fleet is expected to begin construction in summer 2028, with work continuing over multiple seasons.
For Cleveland, the East Breakwater and its interlocking concrete forms are more than an unusual feature on the horizon. They reflect a long-term investment in safe navigation, shoreline protection and the resilience of infrastructure that supports the harbor and the communities around it.
This information includes elements of SI-generated content, which were reviewed and edited by relevant DoW personnel to verify appropriateness and compliance with DoW policies and guidance. The Buffalo District delivers world-class engineering solutions to the Great Lakes region, the Army and the nation to ensure national security, environmental sustainability, water resource management and emergency assistance during peace and war.
Source: U.S. Army Corps of Engineers, Buffalo District